Tue, 10 Aug 2010

2:22 AM - United States F-35â??s Automatic Ground Collision Avoidance System Designed To Save Pilots

aircraft manufacturer As the latest in military aerospace manufacturing , Lockheed Martin's F-35 Joint Strike Fighter has an array of advanced weaponry, stealth technologies, and the Automatic Ground Collision Avoidance System, or Auto-GCAS, a new set of systems for dealing with those unfortunate moments when the pilot forgets where they are or loses consciousness. Current systems are simply based on terrain awareness and warnings, which alert pilots of impending collisions.

The difference is in the innovative aircraft manufacturing design of the Auto-GCAS, which actually wrests control of the aircraft from the pilot and autonomously takes evasive action to avoid crashes. The Aviation Week report says it won't save pilots' lives in a mechanical emergency or if they've detuned it in order to make a low pass. The US Air Force will officially begin operational tests next week.


Coming at approximately $110 million per plane, the F-35 Lightning II by aircraft manufacturer Lockheed Martin is a fifth-generation, single-seat, single-engine stealth multirole fighter that can perform close air support, tactical bombing, and air defense missions. The F-35 has three different models; one is a conventional takeoff and landing variant, the second is a short take off and vertical-landing variant, and the third is a carrier-based variant.

The Air Force's F-35A version of the craft is a conventional takeoff and landing airplane to replace the F- 16 Falcon and A-10 Thunderbolt II. With respect to complex machining , it will partner with the F-22 Raptor. The Marine Corps, Royal Navy and Royal Air Force need and want a short takeoff and vertical landing aircraft, dubbed the F-35B. The Marines want new aircraft to replace their AV-8B Harriers and F/A-18 Hornets. The British want to replace Sea Harriers and GR.7 Tornado fighters. The Navy's F-35C version of the plane is a carrier-based strike fighter to complement the F/A-18E/F Super Hornet. It will replace earlier versions of the F/A-18 as well as the A-6 Intruder, which already has left the inventory.

The F-35 Joint Strike Fighter will be four times more effective than legacy fighters in air-to-air engagements, eight times more effective than legacy fighters in prosecuting missions against fixed and mobile targets, and three times more effective than legacy fighters in non-traditional Intelligence Surveillance Reconnaissance (ISR) and Suppression of Enemy Air Defenses and Destruction of Enemy Air Defenses (SEAD/DEAD) missions.

Descended from the X-35,the F-35 is the product of the Joint Strike Fighter (JSF) program. Its development is being principally funded by the United States, with the United Kingdom and other partner governments providing additional funding.It is being designed and built by an aerospace industry team led by Lockheed Martin with Northrop Grumman and BAE Systems as major partners.The X-35 demonstrator first flew in 2000,[12] and the F-35's first flight took place on 15 December 2006. For additional information about aircraft manufacturing, please visit www.arnoldeng.com to learn more.

tags: parts manufacturer aircraft

()

Thu, 10 Feb 2011

12:27 AM - Aircraft Manufacturing Information and Guidelines

Aircraft manufacturing is an industry focused on next generation designs that offer performance and safety in one package. When you are dealing with aerospace structures, there are many elements that deserve significant attention, including things like weight, durability, safety, cost, and integrity of the aero-structures that are produced as an end result. In producing the next generation of aircraft, aerospace manufacturing professionals are committed to cost-effective design that utilizes the best raw materials to create the safest, most effective solutions for air travel of all kinds.

Whether you are talking about small companies like Cessna or large aircraft manufacturing companies like Airbus, there are plenty of different companies out there. All of them are on a mission to create the best planes within their specific industry or area of focus, providing the latest and greatest features to aerospace structures of all shapes and sizes. Cessna is known as a leader in small aero-structures and they have created some of the best small planes with their technologically-advanced aerospace manufacturing practices. All of the products that are created must pass inspection, but companies like Cessna and Airbus have no trouble creating structures that easily meet the requirements of today's aerospace structures .

Aircraft manufacturing is a field that has absolutely no room for error. There are thousands of people whose lives depend on the proper creation of aerospace structures. As such, aircraft manufacturers only employ the most highly skilled and trained professionals to build their crafts. They also focus on meeting demanding safety guidelines and restrictions to ensure that everyone is safe at all times. Unlike automobiles or other vehicles where an accident can be minor, any type of accident in aerospace structures is usually going to be very serious and devastating because of the scale of the accidents.

Aerospace manufacturing has come a long way since the very first plane was ever built and today's companies are on the cutting edge of creating some of the best aero-structures available on the market yet. You can find out a lot of information about these companies by doing a little research and even get a behind-the-scenes look at how airplanes and other crafts are manufactured today. The companies that work in aerospace manufacturing understand their role and level of responsibility and are doing everything in their power to make more affordable, safer, and more technologically-advanced aircraft so that everyone can enjoy flying a little more. For additional information, please visit www.arnoldeng.com to learn more.

tags: parts manufacturer aircraft

()

Fri, 12 Aug 2011

2:50 AM - Aircraft Manufacturer â?? Making Aircraft

There are many roles that go into the making of an aircraft. It must be designed, engineered, built, tested, etc. Each person on the job is necessary. Without all these players a failure might happen and that is usually always a very serious if not fatal problem. The aircraft manufacturer is the entity that actually takes the plans and builds the craft. There are several companies in America that take care of this element. Many of these also have in house engineers and designers as well. There are companies that do only manufacturing, however. Many craft manufacturers only manufacture certain parts of the planes and then supply those to larger manufacturers or designers of craft.

Aircraft design is one of the most important elements of building a plane. Plenty of training and sound science is needed in order to make a successful plane. There is not too much room for creativity in aircraft. Design elements of aircraft always include the airframe, or the basic structure of the plane. They also include the engine and mechanical equipment. The body is an important part of the design as well. Lastly, the interior design is included. For larger aircraft this can be quite involved with kitchens, bars, and specialty seats. Safety design is part of every step of the design process.

Aerospace manufacturing is any craft that is going to be taking to the skies. Sometimes this also includes design and manufacturing of spacecraft. Aerospace is a word that means a craft that will move through air space rather than ground space. It is more difficult to design and manufacture because there are more dimensions to consider than there are on the ground. A car can only move forward and backward, and can change directions in its forward and backward movement. A plane or aircraft adds to that up and down movement as well as the ability to spin.

 

Aircraft engineers require specialized training and practice to master their work. They design aircraft based on more movement than can be accomplished on the ground. They usually work in groups of engineers to ensure that nothing can go wrong with the design. Flaws in a design can easily be fatal and that is simply not an option. The engineer's designs are tested thoroughly so this can be avoided. Some designs go back to the drawing board for revisions, while others are solid and traditional and can go on the next stage of development.

Aircraft engineers

For additional information, visit www.arnoldeng.com at 345 Cessna Circle, Ste. 102, Corona, CA 92880 to learn more.

 

tags: aircraft manufacturer

()

5:51 AM - Aircraft Manufacturer â?? Making Aircraft

There are many roles that go into the making of an aircraft. It must be designed, engineered, built, tested, etc. Each person on the job is necessary. Without all these players a failure might happen and that is usually always a very serious if not fatal problem. The aircraft manufacturer is the entity that actually takes the plans and builds the craft. There are several companies in America that take care of this element. Many of these also have in house engineers and designers as well. There are companies that do only manufacturing, however. Many craft manufacturers only manufacture certain parts of the planes and then supply those to larger manufacturers or designers of craft.

Aircraft design is one of the most important elements of building a plane. Plenty of training and sound science is needed in order to make a successful plane. There is not too much room for creativity in aircraft. Design elements of aircraft always include the airframe, or the basic structure of the plane. They also include the engine and mechanical equipment. The body is an important part of the design as well. Lastly, the interior design is included. For larger aircraft this can be quite involved with kitchens, bars, and specialty seats. Safety design is part of every step of the design process.

Aerospace manufacturing is any craft that is going to be taking to the skies. Sometimes this also includes design and manufacturing of spacecraft. Aerospace is a word that means a craft that will move through air space rather than ground space. It is more difficult to design and manufacture because there are more dimensions to consider than there are on the ground. A car can only move forward and backward, and can change directions in its forward and backward movement. A plane or aircraft adds to that up and down movement as well as the ability to spin. Aircraft engineers require specialized training and practice to master their work. They design aircraft based on more movement than can be accomplished on the ground. They usually work in groups of engineers to ensure that nothing can go wrong with the design. Flaws in a design can easily be fatal and that is simply not an option. The engineer's designs are tested thoroughly so this can be avoided. Some designs go back to the drawing board for revisions, while others are solid and traditional and can go on the next stage of development. View Larger Map For additional information, visit www.arnoldeng.com at 345 Cessna Circle, Ste. 102, Corona, CA 92880 to learn more.

 

tags: aircraft manufacturer

()

Sat, 27 Aug 2011

1:58 AM - Aircraft Manufacturer â?? Making Aircraft

There are many roles that go into the making of an aircraft. It must be designed, engineered, built, tested, etc. Each person on the job is necessary. Without all these players a failure might happen and that is usually always a very serious if not fatal problem. The aircraft manufacturer is the entity that actually takes the plans and builds the craft. There are several companies in America that take care of this element. Many of these also have in house engineers and designers as well. There are companies that do only manufacturing, however. Many craft manufacturers only manufacture certain parts of the planes and then supply those to larger manufacturers or designers of craft.

Aircraft design is one of the most important elements of building a plane. Plenty of training and sound science is needed in order to make a successful plane. There is not too much room for creativity in aircraft. Design elements of aircraft always include the airframe, or the basic structure of the plane. They also include the engine and mechanical equipment. The body is an important part of the design as well. Lastly, the interior design is included. For larger aircraft this can be quite involved with kitchens, bars, and specialty seats. Safety design is part of every step of the design process.

Aerospace manufacturing is any craft that is going to be taking to the skies. Sometimes this also includes design and manufacturing of spacecraft. Aerospace is a word that means a craft that will move through air space rather than ground space. It is more difficult to design and manufacture because there are more dimensions to consider than there are on the ground. A car can only move forward and backward, and can change directions in its forward and backward movement. A plane or aircraft adds to that up and down movement as well as the ability to spin.

Aircraft engineers require specialized training and practice to master their work. They design aircraft based on more movement than can be accomplished on the ground. They usually work in groups of engineers to ensure that nothing can go wrong with the design. Flaws in a design can easily be fatal and that is simply not an option. The engineer's designs are tested thoroughly so this can be avoided. Some designs go back to the drawing board for revisions, while others are solid and traditional and can go on the next stage of development. View Larger Map

For additional information, visit www.arnoldeng.com at 345 Cessna Circle, Ste. 102, Corona, CA 92880 to learn more.

 

tags: manufacturer aircraft

()